€ 455.00
Sku: AMOS-825-1Q10A1
VIA Technologies
  • - Values ​​subject to change.

  • - Some of the articles require confirmation when ordering.

Fanless embedded ARM Mini-PC with NXP Cortex-i.MX 6Quad A9 quad-core SoC 1.0GHz, 1GB DDR3 RAM, 16GB eMMC, 4MB SPI Flash ROM, USB 2 2.0, 2.0 USB port Micro OTG, CAN bus, COM, SCSI 50 -pin D-sub, GPIO, Gigabit Ethernet, miniPCIe slot, Micro SD slot, DC-in 9 ~ 36V.

  • 1.0GHz NXP i.MX 6Quad Cortex-A9 quad-core SoC
  • Intelligent power management for vehicles: ACC / IGN on / off delay & current protection
  • Built-in Wi-Fi, Bluetooth and GPS
  • 50-pin D-sub SCSI connector for single cable: video, audio, and peripherals
  • Supports "I / O Legacy" including dual CAN bus, COM and GPIO

VIA-AMOS-825-datasheet

Specifications:

Model Name AMOS-825
Processor 1.0GHz NXP i.MX 6Quad Cortex-A9 quad-core SoC
System Memory 1GB DDR3 SDRAM onboard
storage 16GB eMMC Flash memory
Boot Loader 4MB SPI Flash ROM
Graphics Vivante GC2000 GPU
3 independent, integrated 3D / 2D and video graphics processing units
Graphics engine supporting OpenGL® ES 2.0, OpenCL and OpenVG ™ 1.1 hardware accleration
Supports MPEG-2, VC-1 and H.264 video decoding up to 1080p
Supports SD encoding
LAN Micrel KSZ9031RNX Gigabit Ethernet transceiver with RGMII support
Wi-Fi / Bluetooth / GPS IEEE 802.11BGN 1T1R & BT4.0 combo USB module
MAX-7 u-blox 7 GPS / GNSS module
Audio NXP SGTL5000 low power stereo codec
USB SMSC USB2514 USB 2.0 high speed 4-port hub controllers
CAN IT SN65HVD1050 EMC optimized CAN transceiver
Expansion I / O 1 miniPCIe slot
Front Panel I / O 1 Micro USB 2.0 OTG port
1 9-pin D-sub connector (supports 1 CAN Bus and 1 COM TX / RX for debug)
1 SCSI 50-pin D-sub connector (Backlight power, Dual-channel LVDS, 4 GPIO,
I2C, Line out and MIC-in)
1 MIC-in
1 Reset button
1 Power & WPAN / WWAN / WLAN LED
1 Antenna hole
1 4-pole Phoenix DC jack
Back Panel I / O 2 USB 2.0 ports
1 Gigabit Ethernet port
2 Antenna connectors for Wi-Fi / BT and GPS
Power Supply 9 ~ 36V DC-in (typical: 7W)
Operating System Android 5.0
Linux Kernel 3.14.28
Watchdog Timer Integrated watchdog timer supports two comparison points. Each comparison point can interrupt ARM core, 2nd comparison point capable of generating external interrupts on WDOG line.
Operating Temperature 0 ° C ~ 60 ° C
Operating Humidity 0% ~ 90% @ 45 ° C (non-condensing)
Vibration Loading During Operation With onboard eMMC
7Grms, IEC 60068-2-64, random, 5 ~ 500Hz, 1hr / axis
Shock During Operation With onboard eMMC
70G, IEC 60068-2-27, half size, 11ms duration
Bottom Opening Covers Open window with removable door to access Micro SD and miniPCIe slots
Dimensions 150.5mm (W) x 48.1mm (H) x 103.3mm (D) (5.9 "x 1.9" x 4.1 ")
Weight 0.673kg (1.48lbs)
Compliance CE, FCC
Add to Favorites:
Favorites
Added to cart:
To the basket