SHIPPING INSURANCE

GUARANTEED DELIVERY

ONLINE SUPPORT

DC-DC ATX DC161W 160W Industrial Power Supply (6 ~ 36 VDC)

Name: DC-DC ATX DC161W 160W Industrial Power Supply (6 ~ 36 VDC) | AGL
Brand: Bicker
SKU: DC161W
Availability: InStock

€ 0.00

Sku: DC161W

Product type: DC-Input Fonts

Manufacturer: Bicker

Description

The rugged ATX DC / DC converter is characterized by its high efficiency and wide input voltage range. For good thermal management the power modules are installed on the underside. In addition to industrial and hospital applications the ignition function also allows applications in vehicles. High quality components provide maximum reliability and longevity.

ATX DC / DC converter.
Wide input range 6 ~ 36 VDC
Operating temperature -20 ~ + 70º C.
Efficiency up to 93%.
Automotive mode for vehicle applications.
No minimum load required.
Wiring management system.
High quality components ensure high efficiency and longevity.
POWER_ON and POWER_OFF meet the requirements of the Intel® ATX 12V guide.

Specifications
Type	DC / DC, ATX-DC / DC converter circuit board
Output power	160 Watt
Input voltage	24 VDC (6 ... 36 VDC)
Dimensions (WxDxH)	160 x 45 x 24 mm ± 0.5 mm
Warranty	3 Years

Article No.	output voltage	Output current min	Output current Max	Output current peak	Load regulation	Ripple & Noise
DC161W	+ 3.3 V	A 0	A 8	-	± 5%	50 mV
	+ 5 V	A 0	A 8	-	± 5%	50 mV
	+ 12 V	A 0	A 12	-	± 5%	120 mV
	-12 V	A 0	A 0.2	-	± 10%	120 mV
	+ 5 Vsb	A 0	A 2	A 2.5	± 5%	100 mV

Max. (160 V / <6 ° C) and 100 W with free mounting (24 V / <55 ° C). All measurements were performed with an aluminum heat sink (180 x 55 x 3 mm) and a heat transfer cushion (included) at 25 ° C. At the input voltages 6 ... 10 V and / or temperatures> 55 ° C both diagrams should be considered. No galvanic isolation! Ripple and noise were measured by an oscilloscope limited to a bandwidth of 20 MHz with connected capacitors of 10 μF and 0,1 μF at each output. This unit is for mounting purposes only and should not be operated under unassembled conditions. The final assembly must conform to valid EMC standards.