There are no products in your cart
- COVID-19 INFORMATION
- |
- +351 218 278 341
- Send an e-mail
- |
- |
- ACCOUNT
- Favorites
- Login
- |
Industrial Hardware Specialists
+351 218 278 341
+351 929 141 492
The ATX PCFD-180P-X2S power supply with + 24 VDC input uniquely combines the functions of a PC power supply with those of a UPS. Power is provided by a set of separate NiMH batteries in a practical 3,5-inch format. Other output voltages can be supplied upon request. UPS control software is provided for operation without user supervision to be possible.
- 24 VDC input and UPS function.
- No minimum load required.
- possible special voltages.
Specifications |
|
|---|---|
|
Type |
DC / DC, Industrial PC PSU with UPS function, L-bracket |
|
Output power |
120 Watt |
|
Input voltage |
20 ... 36 VDC |
|
Dimensions (WxDxH) |
93 x 160 x 55 mm ± 0.4 mm |
|
Warranty |
3 Years warranty for Industrial PC PSU with UPS function / 1 |
|
Vibration |
10 ... 55 Hz with 2 G, duration 10 cycles, per x, y, z axis (out of operation) |
|
UPS function |
By connection of battery pack BS17A-H24 / 2.0L |
|
Article |
output |
Output current |
Output current |
Heat sink |
Fan |
Peak |
Load |
Ripple & |
|---|---|---|---|---|---|---|---|---|
PCFD-180P-X2S |
+ 3.3 V |
A 0 |
A 10 |
A 10 |
A 10 |
A 10 |
± 5% |
50 mV |
|
+ 5 V |
A 0 |
A 10 |
A 10 |
A 10 |
A 10 |
± 5% |
50 mV |
|
|
+ 12 V |
A 0 |
A 7.5 |
A 8.5 |
A 10 |
A 15 |
± 5% |
120 mV |
|
|
-12 V |
A 0 |
A 0.3 |
A 0.3 |
A 0.3 |
A 0.3 |
± 10% |
120 mV |
|
|
+ 5 Vsb |
A 0 |
A 1 |
A 1 |
A 1.5 |
A 1.8 |
± 5% |
50 mV |
Output power is 90 W without fan, 100 W with heatsink (> 1,6 K / W) and 120 W with fan cooling (30 m3 / h). The combined output load at + 3,3 and + 5 must not exceed 60 W in operation without fan, must not exceed 70 W for heatsink operation and fan cooling (30 m3 / h) must not exceed 83 W. Curl and noise were measured by an oscilloscope of 20 MHz bandwidth with 47 μF ceramic capacitors connected to each output.
This power supply is for mounting purposes only and should not be operated under unassembled conditions. The final assembly must conform to valid EMC standards.
Similar products ...
BS17A-H24 / 2.0L 24V / 2.0Ah Battery Pack for PCFD (L) -180P-X2S2
The BS17A-H24 / 2.0L NiMH battery is for storing power for PCFD-180P-X2S or PCFL-180P-X2S2 power supplies. Due to the higher energy density in the maintenance free batteries, the ...
0.00€
without VAT
0.00€
with VAT
UPS Power Supply eNSP3-450P-RS 350 Watt
The industrial source eNSP3-450P-RS combines the functions of power supply and UPS. ATX PS / 2 format is capable of powering all standard systems. In case of interruption of ...
0.00€
without VAT
0.00€
with VAT
BP-2425N 24V / 2.5Ah Battery Pack for eNSP3-450P
The BP-2425N pack batteries are used to store power for the eNSP3-450P-RS or eNSP3-450P-USB UPS power supply. It is the ideal solution for industrial use with up to ...
0.00€
without VAT
0.00€
with VAT
BP-2423N 24V / 2.3Ah Battery Pack for eNSP3-450P
The BP-2423N battery pack feeds the eNSP3-450P series units. Compact design, intended to be installed in an 5,25 slot. "The connection between the battery pack and the power supply ...
0.00€
without VAT
0.00€
with VAT
PicoUPS-100-ATV (100W Interface Backup)
The UPS-100-ATV power supply is a small but powerful UPS (uninterruptible power supply) solution. The UPS-100-ATV peak has been conveniently designed to be compatible with the standard format. The picoPSU-100-ATV guarantees power ...
48.80€
without VAT
60.02€
with VAT
Source picoUPS-120-ATV (120W Interface Backup for vehicles)
The UPS-120-ATV power supply is a small but powerful UPS (uninterruptible power supply) solution. The UPS-120-ATV peak has been conveniently designed to be compatible with the standard format. The picoPSU-120-ATV guarantees power ...
65.80€
without VAT
80.93€
with VAT
Y-PWR (5-30V Hot-Swap / Power Sharing, max. 2x 10A)
Y-PWR is a 20A, 30V ideal diode OR. Two power sources such as AC / DC adapters of equal voltage can be used to sum (load sharing) the output power into a ...
22.50€
without VAT
27.68€
with VAT
OpenUPS2 (11-24V Input, 12-24V Output 5A, 2.5 'format)
The OpenUPS2 was designed to provide user specified regulated power output from a wide input voltage or battery backup, microprocessor assisted LiFePO4 battery charging and cell balancing in a single ...
99.90€
without VAT
122.88€
with VAT